不銹鋼貯水桶(水塔)整廠設備:
Stainless Steel Water Tank Manufacture and Export of Whole-Plant Equipment
型式
品名
Model
Item Name
JDW-006
 空壓式移動點焊機
Air-Pressure Movable Spot Welder
JDW-007
 自動空油壓直線輪焊機
Automatic Air-Pressure Vertical Seam Welder
JDW-008
 自動桶身加強滾槽機
Automatic Air-Pressure Multiple Convex Line Roller
JDW-009
 底部單領滾槽機
Single Ridge Roller Machine For Bottom Edge
JDW-010
自動空油壓頂蓋橫向輪焊機
Automatic Air-Pressure Horizontal Rolling Welder For Top Cover
JDW-011
 自動空油壓底蓋橫向輪焊機
Automatic Air-Pressure Horizontal Rolling Welder For Bottom Cover


JDW-006

 Length * Width
2550mm * 700mm
1600mm * 800mm

主要說明:40KVA同期式IC控制器
中身板，固定尺寸移動點焊機，焊接能力1.5+1.5m/m，
主迴路SCR系統，焊臂長5.5呎，附固定架。
Main Specification:
40KVA, synchronous type with IC controller.
It sets the dimensions of the central body and the welding specification.This machine has an SCR system and an arm length of 5.5 feet with a welding capacity of 1.5 + 1.5 m/m and a fixed stand.

 

JDW-007

 Length * Width
2550mm * 1000mm
2800mm * 1600mm

主要說明:120KVA同期式IC控制系統
中身料縫焊，脈波放電，條文細密，粗橫可調式，DC傳動，
主迥路SCR系統水冷設備，可12小時工作，焊臂長5.5呎能力
1.6+1.6 m/m，附固定架。
Main Specification:
120KVA, synchronous type with IC controller
This machine is used for the welding of the central body.
The pulsating current can be finely adjusted.
Driven by the DC motor, this machine has an SCR system and its water cooling system can work for 12 hours.
It is operational up to 1.6+1.6 m/m, with an arm lengh of 5.5 feet.

JDW-008

 Length * Width
2550mm * 1000mm
2200mm * 1300mm

主要說明:7.5KVA無段式　氣壓控制
 中身料一次成型滾輪，圓度100%速度快、強度夠，
 工作臂長5.5呎，前端備有平衡固定鎖架。
Main Specification:
7.5KVA, stepless type, pneumatic control
 The central body will be 100% round after single-step forming at a high speed. The arm length is 5.5 meters, with a fixed stand in its front for balance.

 

JDW-009

 Length * Width
1000mm * 650mm
1700mm * 400mm

主要說明:7.5KVA無段式　手動加壓
 中身桶成型後底蓋腳架部位加強模圈，工作直徑400m/m至無限大
 ，扭力到2.0鐵板，完全操作。
Main Specification: 7.5KVA, stepless type, hand control
 After forming of the central body, the ridge on the lower cover supported by the stand will be reinforced.
The min. diameter is 400 m/m. It is operational up to a thickness of 2.0 mm.

JDW-010

 Length * Width
2550mm * 1000mm
2850mm * 1800mm

主要說明:160KVA同步式　IC控制系統
 上蓋縫焊、脈波放電、條文細粗可調式、加強電流設定、DC
 傳動速度可調、主迴路SCR系統水冷式，可連續12小時作業，
臂長5.5呎，能力2.0+2.0m/m附架。

Main Specification:
160KVA, synchronous type with IC controller
This welder is used for roller-welding of top cover. The pulsating current and speed can be set and finely adjusted. Its water-cooling type SCR system can work for 12 hours continuously. It is operational up to a maximum thickness of 2.0 mm with an arm length of 5.5 feet and a fixed stand.

JDW-011

 Length * Width
2550mm * 1000mm
2850mm * 1850mm

主要說明:175KVA同步式　IC控制系統
 下蓋縫焊、脈波放電、條文細粗可調式、加強電流設定、
 DC傳動速度可調、主迴路SCR系統水冷式，可作業12小時 ，
 臂長6呎焊能力2.0+2.0m/m附架。
Main Specification:
 175KVA, synchronous type with IC controller
This welder is used for roller-welding of bottom cover. The pulsating current and speed can be set and finely adjusted. Its water-cooling type SCR system can work for 12 hours continuously. It is operational up to a maximum thickness of 2.0 mm, with an arm length of 6 feet and a stand.